Products

Washing

Back

Sanitary barriers

TP2 MICROPROCESSOR

- Easy to use and fully programmable

- Traceability as standard.

- 8 dosage signals as standard.

- Screens in both parts of the machine (second screen optional in the LMED models).

- Touch screen operated from the dirty linen side and only visible on the clean linen side, to show the state of the washing programs.

- USB connection. Free PC software for programming, traceability, data analysis...

- Designed for remote communication.

- Personalisation of programs in accordance with each need.

- Wet cleaning.

Optional:

- Printer:

- 6 extra dosage signals.

- Second information screen for LMED.

EXTRAORDINARY

CHARACTERISTICS

- Double screen in LBS and Pullman models; optional second information screen in LMED models.

- Automatic drum positioning with motor brake to facilitate the loading and unloading operation (LBS models; optional in LMED models).

- 3 water inlets in LBS models and 2 in LMED models.

- Wet cleaning: equipped with all the functions for use of the delicate linen wet cleaning programs (useful in residences).

- Outer body in sandwich board, easy to clean.

Optional:

- Detergent tray kit.

- Dual electric-steam heating: saves energy.

- Second drain valve to reclaim the water.

- Tap for extracting water for samples.

- UPS kit to release the drum brake in the case of electric power cut.

- Outer body in AISI 304 stainless steel.

EFFICIENCY

- Intelligent weighing system.

- Possibility of configuring three levels of savings.

- Optimum load.

- Designed for water recovery tanks. Low water consumption.

- Less than 10 litres of water per kilo and cycle (standard wash cycle 60°C).

- High G FORCE

- Reduced residual moisture.

- Reduced drying time.

Optional:

- Automatic weighing system in the feet.

ERGONOMICS

- The large door opening aids loading and unloading of linen; the largest door opening on the market.

- Drum easy to open with push button.

- Loading height: 800 mm.

Optional:

- Plinths for 850 mm loading height.

MAINTENANCE

- Electrical part to the left, mechanical to the right, connections at the top.

- Easy access to all the components.

- Easier to connect, all connections protected from water and detergents.

- Central drain

- Technical menu.

- Statistics, alarms, auto-test, data recovery for technicians and maintenance.

Optional:

- Side drain.

- Low steam pressure: to allow the installation of steam-heated washers with low steam pressure in situ.

LMED range - 16 - 22 kg

- G FORCE 350

- New TP2 processor with 4.3” touch screen on the dirty side (optional on the clean side).

- External body in sandwich board, easy to clean, stainless steel appearance.

- Heating versions: electric and steam.

- Double heating version, selectable electric and steam.

- 29 programs pre-set from factory.

- Traceability as standard.

- 2 water inlets.

- 8 signals for automatic liquid dosing, programmable in time and delay.

- Optimum load. Intelligent weighing system.

- Possibility of configuring three levels of savings.

- Designed for water recovery tanks. Low water consumption.

- 1-compartment horizontal spin drum.

- Loading and unloading doors. Door locks with safety opening.

- Electrical part to the left, mechanical to the right, connections at the top.

- Central drain

- Technical menu. Statistics, alarms, autotest, data recovery for technicians and maintenance.

- Motor with variable-frequency drive incorporated.

- Prepared for Wet cleaning

  Model Capacity (Lbs) Spin rpm. Power kW Dimensions (mm) Data sheet
LMED-16 TP2 E LMED-16 TP2 E 18 1000 14.2 984x914x1.398 Download
LMED-16 TP2 S LMED-16 TP2 S 18 1000 2.2 984x914x1.398 Download
LMED-22 TP2 E LMED-22 TP2 E 25 1000 20.2 1.184x914x1.398 Download
LMED-22 TP2 S LMED-22 TP2 S 25 1000 2.2 1.184x914x1.398 Download
LMED-35 TP E LMED-35 TP E 37 1000 31 1.276x1.056x1.580 Download
LMED-35 TP S LMED-35 TP S 37 1000 4 1.276x1.056x1.580 Download
LMED-50 TP E LMED-50 TP E 54 945 41.5 1.596x1.056x1.660 Download
LMED-50 TP S LMED-50 TP S 54 945 5.5 1.596x1.056x1.660 Download
LMED-66 TP E LMED-66 TP E 74 945 52.5 1.949x1.056x1.660 Download
LMED-66 TP S LMED-66 TP S 74 945 7.5 1.949x1.056x1.660 Download
LMED-66 TP E UP LMED-66 TP E UP 74 945 52.5 1.949x1.056x1.660 Download
LMED-66 TP S UP LMED-66 TP S UP 74 945 7.5 1.949x1.056x1.660 Download
LMED-16 TP2 ES LMED-16 TP2 ES 18 1000 14,2 984x914x1.398 Download
LMED-22 TP2 ES LMED-22 TP2 ES 25 1000 20,2 1.184x914x1.398 Download

Pullman Range - 100 kg

- Washer with transmission barrier

- Drum with Pullman separation.

- G Force 325.

- New TP2 processor with two 7” screens, a touch screen for programming on the dirty linen loading side, and an information screen on the unloading side in the clean zone.

- Outer body in sandwich board, easy to clean, stainless steel appearance.

- Heating versions: electric and steam.

- Optional dual heating.

- 29 programs pre-set from factory.

- “WASH CONTROL” management program included.

- 3 water inlets.

- 8 signals for automatic liquid dosing, programmable in time and delay.

- Optimum load. Intelligent weighing system.

- Possibility of configuring three levels of savings.

- Designed for water recovery tanks. Low water consumption.

- 1-compartment horizontal spin drum.

- Loading and unloading doors. Door locks with safety opening.

- Automatic drum positioning with motor brake to facilitate the loading and unloading operation. Loading height: 800 mm.

- Electrical part to the left, mechanical to the right, connections at the top.

- Central drain.

- Technical menu. Statistics, alarms, autotest, data recovery for technicians and maintenance.

- Motor with variable-frequency drive incorporated.

- Prepared for Wet cleaning.

- These machines require a hoist for offloading (not included).

  Model Capacity (Lbs) Spin rpm. Power kW Dimensions (mm) Data sheet
LBS-100 MP E LBS-100 MP E 100 750 75 1.680x1.345x2.000 Download
LBS-100 MP S LBS-100 MP S 100 750 15 1.680x1.345x2.000 Download

LBS Range - 27 - 35 - 50 - 70 kg

G Force 375.

- New TP2 processor with two 7” screens, a touch screen for programming on the dirty linen loading side, and an information screen on the unloading side in the clean zone.

- Outer body in sandwich board, easy to clean, stainless steel appearance.

- Heating versions: electric and steam.

- Double heating version, selectable electric and steam.

- 29 programs pre-set from factory.

- Traceability as standard.

- 3 water inlets.

- 8 signals for automatic liquid dosing, programmable in time and delay.

- Optimum load. Intelligent weighing system.

- Possibility of configuring three levels of savings.

- Designed for water recovery tanks. Low water consumption.

- 1-compartment horizontal spin drum (LBS-70 models with two compartments).

- Loading and unloading doors. Door locks with safety opening.

- Automatic drum positioning with motor brake to facilitate the loading and unloading operation. Loading height: 800 mm.

- Electrical part to the left, mechanical to the right, connections at the top.

- Central drain

- Technical menu. Statistics, alarms, autotest, data recovery for technicians and maintenance.

- Motor with variable-frequency drive incorporated.

- Prepared for Wet cleaning.

  Model Capacity (Lbs) Spin rpm. Power kW Dimensions (mm) Data sheet
LBS-27 TP2 E LBS-27 TP2 E 30 920 22 1.200x1.098x1.580 Download
LBS-27 TP2 S LBS-27 TP2 S 30 920 4 1.200x1.098x1.580 Download
LBS-27 TP2 ES LBS-27 TP2 ES 30 620 22 1.200x1.098x1.580 Download
LBS-35 TP2 E LBS-35 TP2 E 39 920 31 1.359x1.098x1.580 Download
LBS-35 TP2 S LBS-35 TP2 S 39 920 4 1.359x1.098x1.580 Download
LBS-35 TP2 ES LBS-35 TP2 ES 39 920 31 1.359x1.098x1.580 Download
LBS-50 TP2 E LBS-50 TP2 E 54 920 41.5 1.654x1.098x1.580 Download
LBS-50 TP2 S LBS-50 TP2 S 54 920 5.5 1.654x1.098x1.580 Download
LBS-50 TP2 ES LBS-50 TP2 ES 54 920 41,5 1.654x1.098x1.580 Download
LBS-70 TP2 E LBS-70 TP2 E 78 920 52,5 2.060x1.098x1.580 Download
LBS-70 TP2 S LBS-70 TP2 S 78 920 7,5 2.060x1.098x1.580 Download
LBS-70 TP2 ES LBS-70 TP2 ES 78 920 52,5 2.060x1.098x1.580 Download
Would you like more information? Contact us!
  • The Name and Surname field is obligatory.
  • The E-mail field is obligatory. Enter a valid e-mail address.
  • The telephone field is obligatory. The format of the number is incorrect. Please enter number again.
  • The Country field is obligatory.
  • The Query field is obligatory.
You must confirm acceptance of the privacy policy.
* Obligatory fields

The information has been sent. Thank you for contacting us. We shall study your request and reply as soon as possible.

Back

An error has occurred. Please try again.